- 快速 LED 或UV/可见光和/或热固化
- 体积收缩率极低
- 高Tg和低CTE
- 符合 ASTM E595 低排气标准
- NASA MAPTIS 认证（材料代码 09852）
- 不可冷冻储存，冷藏运输/储存 1-5°C [34-41° F]
低收缩主动配向相机模组胶
9803
具有 LED 和/或热固化特性的低收缩光学相机模块胶粘剂
Dymax 9803 低收缩光学环氧胶胶粘剂可为相机模块和激光雷达组件、主动对准和其他光学粘接应用中使用的常见基材提供出色的粘合性。该胶粘剂具有独特的灵活性，可在数秒内用 LED 和/或UV/可见光固化，并可在阴影区域用低温加热固化。
此外，9803 满足关键的低排气规格，使其成为复杂光学定位应用的理想选择，例如镜头粘接、将镜筒粘接到支架或将支架粘接到印刷电路板 (PCB)。
单组分环氧树脂需要冷运输和冷储存（应保持在 1°C [34° F] 至 5°C [41°F] 之间），但不需要冷冻运输或储存条件。环氧树脂具有更好的 85°C/85% RH 耐受性，在热偏移过程中表现出较少的整体移动，并且具有更高的粘度和触变性，可在分配时保持珠状。
符合 NASA ASTM E595 低排气规格、通过 NASA MAPTIS 认证（材料代码 09852），并遵循 RoHS 指令 2015/863/EU。
特征
资源
9803 Low Shrink Adhesive For Active Alignment of Camera Modules
Dymax 9803 low-shrinkage cationic epoxy is specifically designed for the alignment of camera modules, optical components, LiDAR (Light Detection and Ranging), and other ADAS (Advanced Driver Assistance Systems) assemblies used in automotive applications. The product cures very fast primarily with LED or broad-spectrum light or UV light only. 9803 also features a low-temperature (80-85°C) heat-cure for shadow areas or where heat-only cure is preferred.
Success Story: Epoxy Helps Automotive Camera Manufacturer Reduce Processing Time by 79%
A manufacturer was looking for an alternative adhesive for their automotive camera module line. Their current active alignment process was slow, driving down throughput. Dymax was able to offer a solution using 9803 low shrink epoxy that allowed the manufacturer to reduce their overall processing time by 79%, as well as achieve higher bond strength, a reduction in shrinkage, and lower shipping and handling costs.
