A case study about how a light-curable adhesive replaced a two-part epoxy for faster sensor assembly and improved the application process. ...
Bonding MLAs in Automotive Headlights
Adhesive for Bonding MLAs in Automotive Headlights Exhibits Low Discoloration Under High Temperatures
Challenge
Bond Different Substrates of MLAs Together Quickly and Prevent Movement
A manufacturer was searching for an adhesive to bond Micro Lens Arrays (MLAs) to brackets that exhibited reliable performance and low discoloration in high-temperature environments found during automotive headlight operation. MLA headlights are connected to sensors with advanced technology that enable automatic adjustment of light intensity, angle, and on/off activation.
Since the assemblies were for MLA headlamps used in ADAS equipped vehicles, the company required a method to bond the different substrates of the components together quickly and provide good adhesion between them. The lenses also had to be secured in place for precise focusing and the material used needed to prevent their discoloration.
Proper alignment of the glass lenses to the metal brackets was important to ensure no movement occurred within the finished component. One small offset within the array could create unclear optics and throw off the functionality of the headlight completely, so lens alignment was critical. Low discoloration was also important at the high-temperature environments the lenses would need to operate under.
In addition, they were seeking a UV-only product rather than UV and heat solution.
Solution
Utilize an Adhesive that Could Withstand Varying Environmental Conditions and Maintain Optical Clarity
The Application Engineering team suggested its Dymax 3013-GEL general purpose UV/Visible light-curable adhesive for its ability to bond dissimilar substrates together and adhesion to withstand temperatures from 140℃ to -30℃. The product featured excellent moisture resistance to survive varying environments as well as blue fluorescence for post cure in-line quality control utilizing optical scanners for high-speed inspection. The adhesive’s lack of discoloration maintained the clear optics of the MLAs, an important attribute required in headlight applications.
With a nominal viscosity of 27,000 cP, the use of an auger valve and air pressure dispenser with large tip was proposed to ensure accurate, sufficient material dispense.
The team recommended using an LED spot at 365 nm wavelength to pre-cure the components, and an LED flood-curing system for full cure, enabling fast curing and maximum production speed for increased throughput.
Results
Expected Output of 48,000 Units Per Year and Greener Process
Dymax 3013-GEL not only exhibited good reliability and performance in challenging environments, but also showed very low discoloration during harsh thermal conditions. By utilizing light-curing technology and working in conjunction with the Dymax team, the manufacturer was able to start production on its MLA assemblies right away. The use of an adhesive with no solvents added and LED curing capability enabled the customer to have a “greener” process by reducing hazardous materials and generating less waste. The expected throughput is estimated to be over 48,000 headlight modules per year.
Related Products
Check out the other Dymax products that work in conjunction with this one to create a complete solution
Product Number
Product Description
Regional Availability
Advanced Driver Assistance Systems (ADAS)
Dymax light-curable encapsulants and positioning adhesives provide protection of sensors in Advanced Driver-Assistance Systems (ADAS), contributing to driver safety and protection from harsh environments.
Flood Curing Systems
Modular LED/UV curing flood lamp system consist of a power supply, reflector housing, and standard 400 Watt metal halide bulb (UV/Visible light systems). Shutter assemblies, mounting stands, light shields, and replacement bulbs are available to create a custom light-cure system.
Check out the other Dymax products that work in conjunction with this one to create a complete solution
More Case Studies
We offer more than products, we offer solutions. See how Dymax is helping customers solve their most challenging applications in various markets.
View allAdhesive Replaces 2-Part Epoxy for Faster Optical Sensor Assembly
Aerospace Improving PCB Conformal Coating Process
A case study on improving the PCB conformal coating process by increasing production output. ...
Aerospace Improving PCB Masking Process
A case study on improving the PCB masking process for an aerospace and defense manufacturer. ...
Aerospace Masking Process for Electroless Nickel Plating
A case study on the masking process for electroless nickel plating ...
Aerospace Printed Circuit Board Assembly
Increasing Production and Reducing Processing Time in PCB Assembly ...
Automated Masking System Revolutionizes Surface Treatment Processing
A case study about how an automated masking line drastically reduced the processing times required for an aero engine component. ...
Cinch Gaming Controllers Get Enhanced Grip
Cinch Gaming, a national leader in custom professional video game controllers, was looking for a durable solution to provide a rubber grip coating to their ABS plastic controller shells. ...
Electrical Explosion Protection & Sensor Technology
A world leader in electrical explosion protection and sensor technology was looking to turn away from laser welding for an application that requires sealing two polycarbonates of their photoelectric ...
GenZe Electric Transportation Battery Pack Gasket
Using a form-in-place gasket to create a reliable battery assembly that meets strict design standards of weight, performance, and safety. ...
High Performance Solutions for EV Charging Stations
A case study on how light-curable conformal coatings and encapsulants helped improve EV smart charging station infrastructure PCB applications. ...
Light-Curing Conveyor Enables 100% Manufacturing Scale Up
A case study on how using Dymax UVCS Light-Curing Conveyor Systems helped to increase the production of nasal swabs.VIDEO: Dymax Partners with 3D Printer Company on COVID-19 Test Swabs #InThisTogeth...
One Part, Optical Epoxy Using UV/Visible Light and Heat Cure
A case study on using ultraviolet and heat cure to secure a camera module holder to a PCB. ...
Ruggedizing Lens and Reflector Housings in Flashlights
A leading manufacturer of premium portable lighting wanted to ruggedize its safety flashlights used in the field by firefighters, police officers, and military troops. In their search for a fast-curi...
Ultra-Red Fluorescing Technology Provides Immediate Quality Check
A case study on how the use of patented Ultra-Red® fluorescing technology can aid in product verification. ...
Get In Touch
Interested in learning more or have questions? We want to hear from you.